
Energy costs for large commercial buildings can run into six figures every month between electricity and water, and a surprising amount of that cost traces back to a single variable: airflow. If a building doesn’t know exactly how much air is moving through its system, it cannot know whether it’s over-ventilating, under-ventilating, or running equipment harder than it needs to. Airflow monitoring closes that gap, and the savings it unlocks are usually immediate and measurable.
This guide covers what airflow monitoring actually does, how it connects to your energy bill, and what to look for when evaluating an airflow measurement system for your building.
What Is Airflow Monitoring?
Airflow monitoring is the continuous or periodic measurement of air volume moving through a duct, air handler, or ventilation system. Rather than assuming a system is delivering the airflow it was designed for, monitoring equipment measures it directly, giving facility teams and building automation systems accurate, real-time data to act on.
How Does Airflow Monitoring Reduce Energy Costs?
Minimum Ventilation and Over-Ventilation Waste
A significant amount of HVAC energy waste comes from moving more air than the building actually needs. ASHRAE Standard 62.1 sets minimum ventilation rates for commercial buildings, and many systems are set well above those minimums out of caution. ASHRAE Research Project RP-1515 found that lowering minimum airflow setpoints to the levels actually required for ventilation cut total HVAC energy by 10 to 30 percent, and field results from UC Berkeley’s Center for the Built Environment showed this was achieved without reducing occupant comfort. Without accurate airflow monitoring, there’s no reliable way to know your minimums are set correctly in the first place.
Catching Deviations Before They Become Expensive
Airflow monitoring also catches problems as they develop rather than after they’ve already cost money. A slow drop in airflow from a loading filter, a stuck damper, or a failing fan often shows up in the data well before it shows up as an occupant complaint or a spike in the utility bill.
Airflow Measurement Stations (AFMS) Explained
Airflow measurement stations, often shortened to AFMS, are dedicated devices installed in ductwork or at air handler inlets to measure airflow with precision across a range of operating conditions. Rather than relying on a single sensor point, quality AFMS designs, such as those from Air Monitor, are built to deliver accurate readings even in duct configurations that would trip up simpler measurement methods, which matters a great deal in real buildings where ideal straight-run duct sections are rare.
Airflow Monitoring and Your Building Automation System
Airflow data becomes most useful once it’s fed into a building automation system. When airflow sensors are integrated with a BAS, the system can automatically flag deviations caused by filter loading or equipment wear, adjust control sequences to keep delivered airflow matching design intent, and give facility teams a historical record of how the building responds to occupancy and outdoor conditions over time. That visibility is what separates a building that’s guessing from one that’s actually managing its performance.
Signs Your Building Needs Better Airflow Monitoring
A few signals tend to point directly to an airflow monitoring gap: recurring hot or cold complaints in specific zones, energy bills that climb without an obvious cause, or a building automation system that can’t explain why a piece of equipment is running longer than expected. If any of these sound familiar, the underlying airflow data is probably where the answer is hiding.
Choosing the Right Airflow Measurement Tools
Not every building needs the most advanced sensing technology on the market. Selecting the right airflow measurement tool comes down to three considerations, taken in order.
The first is the application. Supply air, return air, and outside air each behave differently and place different demands on a measurement device. Outside air measurement, for example, often involves low velocities and wide swings in flow, so the device needs to stay accurate at the low end of its range.
The second is the installation constraints. Duct configuration, the amount of straight run available, and whether the measurement point sits in a duct or at a fan inlet all affect which technology will perform reliably. A station that reads accurately in a long, straight duct section may struggle near an elbow or transition, while fan inlet sensors can deliver accurate readings where duct space is limited.
The third is how the data will be used, whether that’s simple trending for the facility team or active integration with a BAS to drive control sequences. Airflow readings are also only as useful as the equipment acting on them, so it’s worth reviewing how your [air handler control dampers](LINK TO BLOG 2 ONCE LIVE) respond to that data.
Working through these in order narrows the options quickly and helps ensure the airflow measurement tools you choose are proven accurate in real-world conditions for your specific application. You can see the airflow measurement and outside air control applications we support, or explore our services for help with product selection, submittals, and startup.
Accurate airflow monitoring is one of the most direct paths to lower energy costs in a commercial building, and it starts with knowing exactly what your system is moving. If you’re evaluating airflow measurement for an upcoming project, request a quote and our team will help you match the right solution to your application.
Frequently Asked Questions
What is an airflow measurement station (AFMS)?
An airflow measurement station is a dedicated device installed in ductwork or at an air handler inlet to accurately measure air volume, even in challenging duct configurations that would affect simpler sensors.
How much energy can airflow monitoring actually save?
ASHRAE Research Project RP-1515 found that lowering minimum airflow setpoints to the levels needed for ventilation reduced total HVAC energy by 10 to 30 percent. Accurate airflow measurement is what allows those minimums to be set and verified with confidence.
Does airflow monitoring require a building automation system?
No, airflow monitoring can operate independently, but its value increases significantly when integrated with a BAS, since that connection allows automatic detection of deviations and real-time control adjustments.
How is airflow detection different from airflow monitoring?
Airflow detection typically refers to identifying whether airflow is present or has stopped, while airflow monitoring measures the actual volume and rate over time, providing far more actionable data for energy and performance decisions.
How often should airflow measurement equipment be checked?
Airflow measurement equipment should be checked as part of regular commissioning and preventative maintenance, with more frequent verification recommended for critical applications like laboratories or after any duct or equipment changes.

